Holemaking Tools For Sale - Boring, Drilling, Reaming | Top Tool & Supply - (66945 Products)
1/32″ Dia. × 3/64″ LOC × 1/4″ Shank Size × 4″ OAL, 4 Flute, Carbide, Uncoated, Ballnose Endmill
Item #: GE90776231
Brand: Harvey Tool
Model #: 776231
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/32″ |
| Usable Length (LU) | 1-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.0155″ |
| Depth of Cut Maximum (APMX) | 3/64″ |
| Body Half Taper Angle (BHTA) | 2 Degrees |
| Overall Length (OAL) | 4″ |
| Length Group | 1.5D |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | Uncoated |
| Decimal Equivalent | 0.0313″ |
| Flute Count (NOF) | 4 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 30 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.40M CB-DRILL 1.500 LOA
Item #: AX4230201570C
Brand: M A Ford
Model #: 30201570C
| Product Specifications | |
|---|---|
| Angle | 130 Degrees |
| Helix Angle | 35 Degrees |
| Applicable Material | Cast Iron | Hardened Steel | Non Ferrous | Special Alloy | Stainless Steel | Steel |
| Flute Count (NOF) | 2 |
| Coating | Uncoated |
| Overall Length (OAL) | 38 mm |
| Cutting Edge Material | Carbide |
| Shank Type | Straight |
| Decimal Equivalent | 0.0157″ |
| Tool Diameter | 0.4 mm |
| Flute Length | 4.8 mm |
| Tool Type | Circuit Board Drill |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
70274 .1451 ST F REAMER
Item #: 98632920
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-1.146MProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.000015/-0.000015
Blank Number Wire Size
#5
Inner Diameter (Decimal Inch)
1.1460
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: LPS / Part #: 97320
Item #: 96759964
Brand: LPS
Model #: 97320Product Specifications
Degreaser Type
Non-Chlorinated Heavy Duty Degreaser
Container Type
Aerosol
Container Size
15 oz
Scent
Orange
Composition
Solvent Based
Disinfectant
No
Net Fill
15 oz
Solution Type
Solvent-Based; Cleaner
Form or Style
Aerosol
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4 CARB SPOT DRILL 140°
Item #: MW23402250140
Brand: Monster Tool Company
Model #: 402-250140
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 1/4″ |
| Application | Drilling |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 1/4″ |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | Super-Alloys / Titanium | Hard Steel |
| Decimal Equivalent | 0.25″ |
| Point Shape | Drill Point |
| Point Angle (SIG) | 140 Degrees |
| Measurement Type | Fractional |
| Flute Helix Angle (FHA) | 20 Degrees |
| Length Group | Short |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Overall Length (OAL) | 2-1/2″ |
| Series/List # | 402 |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Grade | C-2 Sub-Micron |
| Coating | Bright |
| Length Chip Flute (LCF) | 3/4″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8 RHS / RHC HSS-CO 8% (M42) 135 Degree Split Point Q-Cobalt Wide Land Parabolic Jobber Drill - TiAlN
Item #: CD70C16981
Brand: Cleveland
Model #: C16981
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 1/8″ |
| Point Shape | Split |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 1/8″ |
| Shank Type | Straight |
| Decimal Equivalent | 0.125″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Measurement Type | Inch |
| Shape | Jobber Drill |
| Angle | 135 Degrees |
| Tool Type | Drill |
| Cutting Edge Material | HSSCo |
| Tool Radius | 135 Degrees |
| Flute Type | Spiral |
| Series/List # | 2075-TA |
| Coating | TiAlN |
| Flute Count (NOF) | 2 |
| Flute Length | 1-5/8″ |
| Overall Length (OAL) | 2-3/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4-1/2 RHS / RHC HSS 118 Degree Radial Point 1/4″ Reduced Shank Silver & Deming Drill Set - Steam Oxide
Item #: CH1556340
Brand: Chicago-Latrobe
Model #: 56340
| Product Specifications | |
|---|---|
| Tool Type | Standard Point |
| Cutting Edge Material | HSS |
| Diameter Range | 1/4″ to 1/2″ |
| Flute Type | Regular Spiral |
| Shank Type | Round|Reduced Shank |
| Flute Helix Angle (FHA) | CW |
| Coating | Black Oxide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
ZXMT140408GM PR1210
Item #: KY90TKA09514
Brand: Kyocera Precision Tools
Model #: TKA09514
| Product Specifications | |
|---|---|
| Cutting Edge Length (L) | 0.7087″ |
| Applicable Material | Cast Iron |
| Insert Width (W1) | 0.5669″ |
| Chip Breaker Type | GM |
| Insert Thickness (S) | 0.1921″ |
| Series/List # | DRX Magic Drill |
| Corner Radius (RE) | 1/32″ |
| Cutting Edge Material | Carbide |
| Fixing Hole Diameter (D1) | 0.224″ |
| Number of Cutting Edges | 4 |
| Shape | Irregular |
| Measurement Type | Inch |
| Coating | MEGACOAT |
| Cutting Direction (HAND) | Right Hand |
| Grade | PR1210 |
| Insert Style | ZXMT |
| Application | Drilling |
| Insert Size | 140408 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
9/64″ Dia. × 0.141″ Shank × 15/16″ Flute Length × 1-15/16″ OAL, Stub, 140°, Bright, 2xD Flute, Round Solid Carbide Drill
Item #: BA11B54182
Brand: Bassett
Model #: B54182
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 9/64″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 9/64″ |
| Tool Type | Drill |
| Decimal Equivalent | 0.1406″ |
| Flute Type | Straight |
| Length Group | Stub |
| Point Shape | Standard |
| Coating | Bright |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 9/64″ |
| Series/List # | DM |
| Point Angle (SIG) | 140 Degrees |
| Length Chip Flute (LCF) | 15/16″ |
| Shank Length (LS) | 1″ |
| Overall Length (OAL) | 1-15/16″ |
| Shank Type | Round |
| Flute Count (NOF) | 2 |
| Shape | Solid Carbide |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3.9 mm Dia. × 6 mm Shank × 24 mm Flute Length × 66 mm OAL, 3xD, 124°, Uncoated, 3 Flute, External, Round Solid Carbide Drill
Item #: AX6064609
Brand: KYOCERA SGS Precision Tools
Model #: 64609
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 3.9 mm |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.1535″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 3.9 mm |
| Flute Type | Spiral |
| Length Group | 3xD |
| Measurement Type | Metric |
| Coating | Uncoated |
| Series/List # | 131N |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Usable Length (LU) | 17 mm |
| Coolant Supply Property (CSP) | External |
| Length Chip Flute (LCF) | 24 mm |
| Point Angle (SIG) | 124 Degrees |
| Overall Length (OAL) | 66 mm |
| Flute Helix Angle (FHA) | 30 Degrees |
| Flute Count (NOF) | 3 |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
4 5/8″ Bore Diameter × 4″ Hone Length × 13.5″ Overall Length, 800 Grit, Aluminum Oxide - Standard Duty Flex-Hone
Item #: MJ73GB458800AO
Brand: Brush Research
Model #: GB458800AO
| Product Specifications | |
|---|---|
| Type | Standard Duty Flex-Hone |
| Hone Length | 4″ |
| Abrasive Material | Aluminum Oxide |
| Overall Length | 13.5″ |
| Grit | 800 |
| Specification | Non-ferrous Materials |
| Bore Diameter | 4 5/8″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
69152 .0276 ST F REAMER
Item #: 79902631
Brand: SGS
Model #: 45024Product Specifications
Mill Diameter (Decimal Inch)
0.9843
Mill Diameter (mm)
25.00
Number Of Flutes
3
Length of Cut (mm)
35.0000
End Mill Material
Solid Carbide
End Type
Square
Centercutting
Yes
Finish/Coating
TI-NAMITE-B
Shank Diameter (mm)
25.0000
Helix Angle
38
Chipbreaker
Yes
Variable Helix
No
Extended Reach
No
Overall Length (mm)
176.0000
Shank Type
Straight-Cylindrical
Material Grade
Micrograin
Flute Type
Chipbreaker
Series
S-Carb
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
70003 .1172 ST F REAMER
Item #: 85121481
Brand: Widia
Model #: 3992234Product Specifications
Minimum Drill Diameter (mm)
24.00
Maximum Drill Diameter (mm)
24.99
Drill Depth by Diameter Ratio
8xD
Maximum Drill Depth (mm)
200.00
Shank Type
Flatted
Insert Style
TDM
Insert Seat Size
W33
Shank Diameter (mm)
25.0000
Tool Material
Steel
Compatible Insert Style
TDM
Compatible Insert Size Code
W33
Overall Length (mm)
292.5000
Series
TDM1
Toolholder Style
TDM1
Flute Length (mm)
231.00
Body Length
236.500
Shank Length (mm)
56.000
Tool Application
Drilling
Tool Performance
General Purpose
Primary Workpiece Material
Universal
Cutting Direction
Right Hand
Coolant Through
Yes
Number Of Flutes
2
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4X2-3/4X5 5FL TPLUS SQ
Item #: HS1081847
Brand: Helical Solutions
Model #: 81847
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Applicable Material | | Stainless Steel | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Length Group | 3.5D |
| Depth of Cut Maximum (APMX) | 2-3/4″ |
| Decimal Equivalent | 0.75″ |
| Overall Length (OAL) | 5″ |
| Measurement Type | Inch |
| Coating | TPLUS |
| Shank Length (LS) | 2.25″ |
| Flute Count (NOF) | 5 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
69166 .0291 ST F REAMER
Item #: 29153772
Brand: Norton
Model #: 66260207878Product Specifications
Wheel Type
Cut-Off
Wheel Diameter (mm)
100.00
Grit
320
Grade
Super Fine
Hole Size
10.000
Maximum Rpm
15279.000
Face Width (Inch)
25/64 in
Super Abrasive Wheel Type Number
Type 1V1
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
#45 RHS / RHC HSS 118 Degree Radial Point CLE-MAX Jobber Drill - TiCN
Item #: CD71C73145
Brand: Cleveland
Model #: C73145
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #45 |
| Point Shape | Radial |
| Decimal Equivalent | 0.082″ |
| Shank Type | Straight |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #45 |
| Standard | ASME B94.11M |
| Measurement Type | Wire Gage |
| Connection Diameter Machine Side (DCONMS) | 0.082″ |
| Angle | 118 Degrees |
| Shape | Jobber Drill |
| Cutting Edge Material | HSS-E |
| Tool Type | Drill |
| Flute Type | Spiral |
| Tool Radius | 118 Degrees |
| Coating | TiCN |
| Series/List # | 2002G-TC |
| Flute Length | 1-1/8″ |
| Flute Count (NOF) | 2 |
| Helix Angle | 32 Degrees |
| Overall Length (OAL) | 2-1/8″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.50mm RHS / RHC HSS 118 Degree Radial Point General Purpose Drill - Bright
Item #: CH1147213
Brand: Chicago-Latrobe
Model #: 47213
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 0.5 mm |
| Point Shape | Radial |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 0.5 mm |
| Shank Type | Straight |
| Measurement Type | Metric |
| Connection Diameter Machine Side (DCONMS) | 0.5 mm |
| Angle | 118 Degrees |
| Shape | Jobber Drill |
| Cutting Edge Material | HSS |
| Tool Type | Drill |
| Flute Type | Spiral |
| Tool Radius | 118 Degrees |
| Coating | Bright |
| Series/List # | 150D |
| Flute Length | 6 mm |
| Flute Count (NOF) | 2 |
| Helix Angle | CW |
| Overall Length (OAL) | 22 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
77356 10.3MM DR ALTIMA
Item #: AX3277356
Brand: M A Ford
Model #: 20540550A
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 10.3 mm |
| Coolant Supply Property (CSP) | External |
| Decimal Equivalent | 0.4055″ |
| Point Angle (SIG) | 135 Degrees |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 10.3 mm |
| Measurement Type | Metric |
| Length Group | 5xD |
| Usable Length (LU) | 49 mm |
| Coating | Altima |
| Overall Length (OAL) | 84 mm |
| Connection Diameter Machine Side (DCONMS) | 10.3 mm |
| Flute Count (NOF) | 2 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8″ Cutting Dia. × 1/8″ Shank Size × 3/16″ LOC × 3″ OAL, 4 Flute, Carbide, Uncoated, Square End Mill
Item #: GE90801808
Brand: Harvey Tool
Model #: 801808
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Usable Length (LU) | 1-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Neck Diameter (DN) | 0.121″ |
| Depth of Cut Maximum (APMX) | 3/16″ |
| Length Group | 12D |
| Overall Length (OAL) | 3″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | Uncoated |
| Decimal Equivalent | 0.125″ |
| Flute Count (NOF) | 4 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 30 Degrees |
| Shank Size (SS) | 1/8″ |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
69790 .0950 ST F REAMER
Item #: 08729204
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.816MCProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00001/-0.00001
Blank Number Wire Size
#3
Inner Diameter (Decimal Inch)
0.8160
Calibrated
Yes
Traceability Certification Included
NIST
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It