Fasteners > Nails & Staples (ET04) - (818 Products)
Fasteners > Nails & Staples (ET04)
DeWALT - 13 Gauge 2" Long Roofing Nails for Power Nailers - Steel, Galvanized Finish, Smooth Shank, Coil Collation, Round Head, Blunt Diamond Point
Item #: 32347858
Brand: DeWALT
Model #: DWC6R99BCG
Exact Tooling IR#: 04
Features and Benefits
Roofing nails are typically shorter in length than other nail types. They are used to install roofing felt, shingles, roofing tile and sheet metal.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Roofing |
| Gauge | 13 |
| Length (Inch) | 2 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Coil |
| Finish/Coating | Galvanized |
| Head Type | Round |
| Collation Angle | 15.00 |
| Point Type | Blunt Diamond |
$83.36
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 13 Gauge 0.09" Shank Diam 1-1/4" Long Framing Nails for Power Nailers - Steel, Stainless Steel Finish, Ring Shank, Coil Wire Collation, Round Head, Blunt Diamond Point
Item #: 39066857
Brand: Stanley Bostitch
Model #: C3R90BDSS-316
Exact Tooling IR#: 04
Features and Benefits
Framing nails are used to fasten joists, subfloors, sheathing, beams and other structural components.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Ring shanks have a series of tapered rings that increase holding power. The top of each ring is wider than the bottom, which locks the nail in place and makes it difficult to remove.
| Product Specifications | |
|---|---|
| Type | Framing |
| Gauge | 13 |
| Diameter (Decimal Inch) | 0.0900 |
| Length (Inch) | 1-1/4 |
| Material | Steel |
| Shank Type | Ring |
| Collation Type | Coil |
| Finish/Coating | Stainless Steel |
| Head Type | Round |
| Collation Material | Wire |
| For Use With | N80CB; N86C; N89C; N100C; N100CPP; N75C |
| Collation Angle | 15.00 |
| Point Type | Blunt Diamond |
$74.68
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 12 Gauge 0.113" Shank Diam 2-3/8" Long Framing Nails for Power Nailers - Steel, Bright Finish, Ring Shank, Angled Stick Paper Tape Collation, Round Head
Item #: 70467873
Brand: Stanley Bostitch
Model #: PT-8DR113FH5
Exact Tooling IR#: 04
Features and Benefits
Framing nails are used to fasten joists, subfloors, sheathing, beams and other structural components.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Ring shanks have a series of tapered rings that increase holding power. The top of each ring is wider than the bottom, which locks the nail in place and makes it difficult to remove.
| Product Specifications | |
|---|---|
| Type | Framing |
| Gauge | 12 |
| Diameter (Decimal Inch) | 0.1130 |
| Length (Inch) | 2-3/8 |
| Material | Steel |
| Shank Type | Ring |
| Collation Type | Angled Stick |
| Finish/Coating | Bright |
| Head Type | Round |
| Collation Material | Paper Tape |
| For Use With | Most 30 to 34 Degree Paper Tape Nailers |
| Collation Angle | 33.00 |
$105.03
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DeWALT - 18 Gauge 1-1/2" Long Finishing Nails for Power Nailers - Steel, Bright Finish, Smooth Shank, Straight Stick Collation, Brad Head, Chisel Point
Item #: 59155416
Brand: DeWALT
Model #: DBN18150
Exact Tooling IR#: 04
Features and Benefits
Finishing nails are used in molding, millwork, baseboards and other finishing applications. They have a small head for countersinking to hide the nail head after it is driven.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Finishing |
| Gauge | 18 |
| Length (Inch) | 1-1/2 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Straight Stick |
| Finish/Coating | Bright |
| Head Type | Brad |
| Point Type | Chisel |
$24.20
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DeWALT - 10 Gauge 2.38" Long Framing Nails for Power Nailers - Steel, Bright Finish, Smooth Shank, Angled Stick Collation, Round Head
Item #: 45997293
Brand: DeWALT
Model #: DWRHS8D148
Exact Tooling IR#: 04
Features and Benefits
Framing nails are used to fasten joists, subfloors, sheathing, beams and other structural components.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Framing |
| Gauge | 10 |
| Length (Inch) | 2.3800 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Angled Stick |
| Finish/Coating | Bright |
| Head Type | Round |
| Collation Angle | 21.00 |
$50.44
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 13 Gauge 0.099" Shank Diam 2-1/4" Long Framing Nails for Power Nailers - Steel, Yellow Zinc Finish, Ring Shank, Coil Wire Collation, Round Head, Blunt Diamond Point
Item #: 46954442
Brand: Stanley Bostitch
Model #: AC7DR099BCP
Exact Tooling IR#: 04
Features and Benefits
Framing nails are used to fasten joists, subfloors, sheathing, beams and other structural components.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Ring shanks have a series of tapered rings that increase holding power. The top of each ring is wider than the bottom, which locks the nail in place and makes it difficult to remove.
| Product Specifications | |
|---|---|
| Type | Framing |
| Gauge | 13 |
| Diameter (Decimal Inch) | 0.0990 |
| Length (Inch) | 2-1/4 |
| Material | Steel |
| Shank Type | Ring |
| Collation Type | Coil |
| Finish/Coating | Yellow Zinc |
| Head Type | Round |
| Collation Material | Wire |
| For Use With | N70C; N80C; N86C |
| Collation Angle | 15.00 |
| Point Type | Blunt Diamond |
$160.15
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DeWALT - 11 Gauge 3-1/4" Long Roofing Nails for Power Nailers - Steel, Bright Finish, Smooth Shank, Coil Collation, Round Head, Blunt Diamond Point
Item #: 45996980
Brand: DeWALT
Model #: DWC12P120D
Exact Tooling IR#: 04
Features and Benefits
Roofing nails are typically shorter in length than other nail types. They are used to install roofing felt, shingles, roofing tile and sheet metal.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Smooth shanks have completely smooth shanks. They require less energy to drive than nails with ring shanks but do not provide as much holding power.
| Product Specifications | |
|---|---|
| Type | Roofing |
| Gauge | 11 |
| Length (Inch) | 3-1/4 |
| Material | Steel |
| Shank Type | Smooth |
| Collation Type | Coil |
| Finish/Coating | Bright |
| Head Type | Round |
| Collation Angle | 15.00 |
| Point Type | Blunt Diamond |
$58.39
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Powers Fasteners - 10 Load, Brown, 0.27 Caliber, Power Load Strip Powder Actuated Load - 7" Wide x 2" Deep x 1-1/2" High, For Use with HILTI DX350; HILTI DX36M; HILTI DX451; HILTI DX460; P3500; P3600; PA351; PA3500; RAMSET SA270; VIPER
Item #: 77486884
Brand: Powers Fasteners
Model #: 50620-PWR
Exact Tooling IR#: 04
Features and Benefits
Power loads are bullet-shaped gunpowder cartridges that create enough force to install a drive pin or threaded stud into concrete or steel. Power loads are used in powder-actuated tools or stud drivers. They can be loaded and fired quickly.
| Product Specifications | |
|---|---|
| Type | Power Load Strip |
| Caliber | 0.27 |
| Color | Brown |
| For Use With | HILTI DX350; HILTI DX36M; HILTI DX451; HILTI DX460; P3500; P3600; PA351; PA3500; RAMSET SA270; VIPER |
| Number of Loads | 10 |
| Width (Inch) | 7 |
| Depth (Inch) | 2 |
| Height (Inch) | 1-1/2 |
$17.55
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Stanley Bostitch - 11 Gauge 0.12" Shank Diam 3-1/4" Long Framing Nails for Power Nailers - Steel, Bright Finish, Ring Shank, Coil Wire Collation, Round Head, Chisel Point
Item #: 89237754
Brand: Stanley Bostitch
Model #: C12R120DSS
Exact Tooling IR#: 04
Features and Benefits
Framing nails are used to fasten joists, subfloors, sheathing, beams and other structural components.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
Ring shanks have a series of tapered rings that increase holding power. The top of each ring is wider than the bottom, which locks the nail in place and makes it difficult to remove.
| Product Specifications | |
|---|---|
| Type | Framing |
| Gauge | 11 |
| Diameter (Decimal Inch) | 0.1200 |
| Length (Inch) | 3-1/4 |
| Material | Steel |
| Shank Type | Ring |
| Collation Type | Coil |
| Finish/Coating | Bright |
| Head Type | Round |
| Collation Material | Wire |
| For Use With | N80CB; N86C; N89C; N100C; N100CPP; N75C |
| Collation Angle | 15.00 |
| Point Type | Chisel |
$404.58
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Powers Fasteners - 10 Load, Green, 0.27 Caliber, Power Load Strip Powder Actuated Load - 7" Wide x 2" Deep x 1-1/2" High, For Use with HILTI DX350; HILTI DX36M; HILTI DX451; HILTI DX460; P3500; P3600; PA351; PA3500; RAMSET SA270; VIPER
Item #: 77486892
Brand: Powers Fasteners
Model #: 50622-PWR
Exact Tooling IR#: 04
Features and Benefits
Power loads are bullet-shaped gunpowder cartridges that create enough force to install a drive pin or threaded stud into concrete or steel. Power loads are used in powder-actuated tools or stud drivers. They can be loaded and fired quickly.
| Product Specifications | |
|---|---|
| Type | Power Load Strip |
| Caliber | 0.27 |
| Color | Green |
| For Use With | HILTI DX350; HILTI DX36M; HILTI DX451; HILTI DX460; P3500; P3600; PA351; PA3500; RAMSET SA270; VIPER |
| Number of Loads | 10 |
| Width (Inch) | 7 |
| Depth (Inch) | 2 |
| Height (Inch) | 1-1/2 |
$17.55
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Powers Fasteners - Green, 0.22 Caliber, Power Load Powder Actuated Load - 2" Wide x 1-1/4" Deep x 2" High, For Use with HILTI DXE37; HILTI DXE72; P2200; P7200; RAMSET 721; RAMSET M70
Item #: 77486850
Brand: Powers Fasteners
Model #: 50504-PWR
Exact Tooling IR#: 04
Features and Benefits
Power load strips are plastic strips that contain power loads. They are inserted into powder-actuated tools to improve firing and reloading times.
| Product Specifications | |
|---|---|
| Type | Power Load |
| Caliber | 0.22 |
| Color | Green |
| For Use With | HILTI DXE37; HILTI DXE72; P2200; P7200; RAMSET 721; RAMSET M70 |
| Width (Inch) | 2 |
| Depth (Inch) | 1-1/4 |
| Height (Inch) | 2 |
$11.94
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Powers Fasteners - 10 Load, Yellow, 0.27 Caliber, Power Load Strip Powder Actuated Load - 7" Wide x 2" Deep x 1-1/2" High, For Use with HILTI DX350; HILTI DX36M; HILTI DX451; HILTI DX460; P3500; P3600; PA351; PA3500; RAMSET SA270; VIPER
Item #: 77486900
Brand: Powers Fasteners
Model #: 50626-PWR
Exact Tooling IR#: 04
Features and Benefits
Power loads are bullet-shaped gunpowder cartridges that create enough force to install a drive pin or threaded stud into concrete or steel. Power loads are used in powder-actuated tools or stud drivers. They can be loaded and fired quickly.
| Product Specifications | |
|---|---|
| Type | Power Load Strip |
| Caliber | 0.27 |
| Color | Yellow |
| For Use With | HILTI DX350; HILTI DX36M; HILTI DX451; HILTI DX460; P3500; P3600; PA351; PA3500; RAMSET SA270; VIPER |
| Number of Loads | 10 |
| Width (Inch) | 7 |
| Depth (Inch) | 2 |
| Height (Inch) | 1-1/2 |
$17.55
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Powers Fasteners - 0.145" Shank Diam, 7/8" Washer Diam, Grade 1062 Steel Powder Actuated Drive Pin with Washer - 0.3" Head Diam, 1-1/4" Shank Length
Item #: 77486744
Brand: Powers Fasteners
Model #: 50092-PWR
Exact Tooling IR#: 04
Features and Benefits
Drive pins with washers are permanent fasteners used in base materials such as concrete and structural steel. The washer increases the pin s bearing surface.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
| Product Specifications | |
|---|---|
| Type | Drive Pin w/ Washer |
| Shank Length (Inch) | 1-1/4 |
| Shank Diameter (Decimal Inch) | 0.1450 |
| Head Diameter (Decimal Inch) | 0.3000 |
| Material | Steel |
| Washer Diameter (Inch) | 7/8 |
| Material Grade | 1062 |
| Material Application | A36 Structural Steel; Concrete; Masonry |
$29.72
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Powers Fasteners - 0.145" Shank Diam, Grade 1062 Steel Powder Actuated Drive Pin - 0.3" Head Diam, 3/4" Shank Length
Item #: 77486645
Brand: Powers Fasteners
Model #: 50022-PWR
Exact Tooling IR#: 04
Features and Benefits
Drive pins are permanent fasteners used in base materials such as concrete and structural steel.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
| Product Specifications | |
|---|---|
| Type | Drive Pin |
| Shank Length (Inch) | 3/4 |
| Shank Diameter (Decimal Inch) | 0.1450 |
| Head Diameter (Decimal Inch) | 0.3000 |
| Material | Steel |
| Material Grade | 1062 |
| Material Application | A36 Structural Steel; Concrete; Masonry |
$10.08
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Powers Fasteners - Brown, 0.22 Caliber, Power Load Powder Actuated Load - 2" Wide x 1-1/4" Deep x 2" High, For Use with HILTI DXE37; HILTI DXE72; P2200; P7200; RAMSET 721; RAMSET M70
Item #: 77486843
Brand: Powers Fasteners
Model #: 50502-PWR
Exact Tooling IR#: 04
Features and Benefits
Power load strips are plastic strips that contain power loads. They are inserted into powder-actuated tools to improve firing and reloading times.
| Product Specifications | |
|---|---|
| Type | Power Load |
| Caliber | 0.22 |
| Color | Brown |
| For Use With | HILTI DXE37; HILTI DXE72; P2200; P7200; RAMSET 721; RAMSET M70 |
| Width (Inch) | 2 |
| Depth (Inch) | 1-1/4 |
| Height (Inch) | 2 |
$11.94
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Powers Fasteners - 10 Load, Red, 0.27 Caliber, Power Load Strip Powder Actuated Load - 7" Wide x 2" Deep x 1-1/2" High, For Use with HILTI DX350; HILTI DX36M; HILTI DX451; HILTI DX460; P3500; P3600; PA351; PA3500; RAMSET SA270; VIPER
Item #: 77486918
Brand: Powers Fasteners
Model #: 50630-PWR
Exact Tooling IR#: 04
Features and Benefits
Power loads are bullet-shaped gunpowder cartridges that create enough force to install a drive pin or threaded stud into concrete or steel. Power loads are used in powder-actuated tools or stud drivers. They can be loaded and fired quickly.
| Product Specifications | |
|---|---|
| Type | Power Load Strip |
| Caliber | 0.27 |
| Color | Red |
| For Use With | HILTI DX350; HILTI DX36M; HILTI DX451; HILTI DX460; P3500; P3600; PA351; PA3500; RAMSET SA270; VIPER |
| Number of Loads | 10 |
| Width (Inch) | 7 |
| Depth (Inch) | 2 |
| Height (Inch) | 1-1/2 |
$17.49
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Powers Fasteners - 0.145" Shank Diam, Grade 1062 Steel Powder Actuated Drive Pin - 0.3" Head Diam, 1/2" Shank Length
Item #: 77486629
Brand: Powers Fasteners
Model #: 50012-PWR
Exact Tooling IR#: 04
Features and Benefits
Drive pins are permanent fasteners used in base materials such as concrete and structural steel.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
| Product Specifications | |
|---|---|
| Type | Drive Pin |
| Shank Length (Inch) | 1/2 |
| Shank Diameter (Decimal Inch) | 0.1450 |
| Head Diameter (Decimal Inch) | 0.3000 |
| Material | Steel |
| Material Grade | 1062 |
| Material Application | A36 Structural Steel; Concrete; Masonry |
$13.37
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Powers Fasteners - 0.145" Shank Diam, 7/8" Washer Diam, Grade 1062 Steel Powder Actuated Drive Pin with Washer - 0.3" Head Diam, 3" Shank Length
Item #: 77486785
Brand: Powers Fasteners
Model #: 50100-PWR
Exact Tooling IR#: 04
Features and Benefits
Drive pins with washers are permanent fasteners used in base materials such as concrete and structural steel. The washer increases the pin s bearing surface.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
| Product Specifications | |
|---|---|
| Type | Drive Pin w/ Washer |
| Shank Length (Inch) | 3 |
| Shank Diameter (Decimal Inch) | 0.1450 |
| Head Diameter (Decimal Inch) | 0.3000 |
| Material | Steel |
| Washer Diameter (Inch) | 7/8 |
| Material Grade | 1062 |
| Material Application | A36 Structural Steel; Concrete; Masonry |
$31.27
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Powers Fasteners - 0.145" Shank Diam, Grade 1062 Steel Powder Actuated Drive Pin - 0.3" Head Diam, 5/8" Shank Length
Item #: 77486637
Brand: Powers Fasteners
Model #: 50016-PWR
Exact Tooling IR#: 04
Features and Benefits
Drive pins are permanent fasteners used in base materials such as concrete and structural steel.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
| Product Specifications | |
|---|---|
| Type | Drive Pin |
| Shank Length (Inch) | 5/8 |
| Shank Diameter (Decimal Inch) | 0.1450 |
| Head Diameter (Decimal Inch) | 0.3000 |
| Material | Steel |
| Material Grade | 1062 |
| Material Application | A36 Structural Steel; Concrete; Masonry |
$17.45
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Powers Fasteners - 0.145" Shank Diam, 7/8" Washer Diam, Grade 1062 Steel Powder Actuated Drive Pin with Washer - 0.3" Head Diam, 2-1/2" Shank Length
Item #: 77486777
Brand: Powers Fasteners
Model #: 50098-PWR
Exact Tooling IR#: 04
Features and Benefits
Drive pins with washers are permanent fasteners used in base materials such as concrete and structural steel. The washer increases the pin s bearing surface.
Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.
| Product Specifications | |
|---|---|
| Type | Drive Pin w/ Washer |
| Shank Length (Inch) | 2-1/2 |
| Shank Diameter (Decimal Inch) | 0.1450 |
| Head Diameter (Decimal Inch) | 0.3000 |
| Material | Steel |
| Washer Diameter (Inch) | 7/8 |
| Material Grade | 1062 |
| Material Application | A36 Structural Steel; Concrete; Masonry |
$31.05
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It