Fasteners > Circuit Board Fasteners (ET04) - (9486 Products)
Fasteners > Circuit Board Fasteners (ET04)
Corner Chamfer End Mill: 8.00 mm Dia, 12.00 mm LOC, 4 Flute, 0.15 mm Chamfer Width, Solid Carbide
Item #: 09707183
Brand: WNT
Model #: 50907080
Product Specifications
| Mill Diameter (mm) | 8.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 12.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1000 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.15 |
| Overall Length (mm) | 58.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Short |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 8.00 |
| UNSPSC Code | 23241614 |
| Series | 50907 |
$60.26
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 7/16; Flute Type: Spiral; Number Of Flutes: 7; End Mill Material: Solid Carbide; Length of Cut (Inch): 2; Coating/Finish: AlCr
Item #: 48561252
Brand: Emuge
Model #: 3918L.04375
Product Specifications
| Mill Diameter (Fractional Inch) | 7/16 |
| Flute Type | Spiral |
| Number Of Flutes | 7 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 2 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 7/16 |
| Shank Type | Straight |
| Length Type | Long Length |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 34; 38 |
| Shank Diameter Tolerance | h6 |
| UNSPSC Code | 27112803 |
$104.43
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Tapered End Mill: 10 deg Angle per Side, 5/64" Small Dia, 0.3100" LOC, 1 Flute, Corner Radius End
Item #: 50850486
Brand: Internal Tool
Model #: 61-1450
Product Specifications
| Mill Diameter (Decimal Inch) | 0.1870 |
| Taper Angle Per Side | 10.00 |
| End Mill Material | Solid Carbide |
| End Shape | Corner Radius |
| Flute Type | Straight |
| Overall Length (Decimal Inch) | 2.5000 |
| Overall Length (Inch) | 2-1/2 |
| Centercutting | Yes |
| Shank Diameter (Decimal Inch) | 0.1875 |
| Shank Diameter (Inch) | 3/16 |
| Nose Radius (Decimal Inch) | 0.0400 |
| Small End Diameter (Decimal Inch) | 0.0780 |
| Small End Diameter (Inch) | 5/64 |
| Tip Diameter (Decimal Inch) | 0.0780 |
| Large End Diameter (Decimal Inch) | 0.1875 |
| Helix Angle | 0 |
| Primary Workpiece Material | Stainless Steel; Cast Iron; Steel; Super Alloys & Titanium |
| Primary Workpiece Material Code | P; S; K; M |
| Material Grade | Micrograin |
| Flute Direction | Right Hand |
| Series | 61 |
| Coating Classification | Uncoated |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.3100 |
| Coolant Through | No |
| Coating/Finish | Bright/Uncoated |
| Number Of Flutes | 1 |
| Included Angle Degree | 20 |
| UNSPSC Code | 27112803 |
$41.50
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 1/16" Dia, 1/4" LOC, 3 Flute, Solid Carbide
Item #: 48129068
Brand: Harvey Tool
Model #: 857262-C8
Product Specifications
| Mill Diameter (Decimal Inch) | 0.0625 |
| Mill Diameter (Inch) | 1/16 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.2500 |
| Length of Cut (Inch) | 1/4 |
| Shank Diameter (Inch) | 1/8 |
| Shank Diameter (Decimal Inch) | 0.1250 |
| Overall Length (Decimal Inch) | 2.5000 |
| Overall Length (Inch) | 2-1/2 |
| Single Or Double End | Single |
| Coating/Finish Family | TiB2 |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 42 |
| Primary Workpiece Material | Aluminum & Non-Ferrous |
| Primary Workpiece Material Code | N |
| Coating/Finish | TiB2 |
| Variable Helix | Yes |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Length Of Cut Range (Decimal Inch) | 0.2000 - 0.3000 |
| Series | Variable Helix End Mills for Aluminum Alloys - Square |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
$46.73
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 7/16" Dia, 1-1/2" LOC, 0.0150" Radius, 4 Flute, Solid Carbide
Item #: 20558763
Brand: Iscar
Model #: 3398025
Product Specifications
| Mill Diameter (Inch) | 7/16 |
| Mill Diameter (Decimal Inch) | 0.4375 |
| Number Of Flutes | 4 |
| Length of Cut (Inch) | 1-1/2 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | AlTiCrSiN |
| Overall Length (Inch) | 4 |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0150 |
| Variable Index | Yes |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Coolant Through | No |
| Pitch | Normal |
| Overall Length (Decimal Inch) | 4.0000 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.6880 |
| Length Type | Long |
| Flute Type | Spiral |
| Extended Reach | Yes |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Decimal Inch) | 0.4370 |
| Shank Diameter (Inch) | 7/16 |
| Reach Length (Decimal Inch) | 1.5000 |
| Reach Length (Inch) | 1-1/2 |
| Shank Diameter Tolerance | h6 |
| Primary Workpiece Material | Hard Material; Stainless Steel; Cast Iron; Superalloys & Titanium; Steel |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | P; S; H; K; M |
| Material Grade | Submicron |
| Series | ECI-4-VF |
| Material Application | Hard Material; Stainless Steel; Cast Iron; Superalloys & Titanium; Steel |
| Coating Classification | PVD |
| For Use With. | Toolholders |
| Manufacturers Catalog Number | ECI-4 437-1.5C015VF4 |
$88.90
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 5/8; Flute Type: Spiral; Number Of Flutes: 7; End Mill Material: Solid Carbide; Length of Cut (Inch): 1-1/4; Coating/Finish: AlCr
Item #: 52464401
Brand: Emuge
Model #: 3937L.062090
Product Specifications
| Mill Diameter (Fractional Inch) | 5/8 |
| Flute Type | Spiral |
| Number Of Flutes | 7 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 1-1/4 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0900 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 5/8 |
| Shank Type | Straight |
| Length Type | Standard Length |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 34; 38 |
| Shank Diameter Tolerance | h6 |
| UNSPSC Code | 27112803 |
$241.57
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 5/16; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Length of Cut (Inch): 1-1/8; Coating/Finish: AlCr
Item #: 60926680
Brand: Emuge
Model #: 3947L.031010
Product Specifications
| Mill Diameter (Fractional Inch) | 5/16 |
| Flute Type | Spiral |
| Number Of Flutes | 4 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 1-1/8 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0100 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 5/16 |
| Shank Type | Straight |
| Length Type | Standard Length |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 35/38 |
| Shank Diameter Tolerance | h5 |
| UNSPSC Code | 27112803 |
| Mill Diameter (Fractional Inch) | 5/16 |
| Flute Type | Spiral |
| Number Of Flutes | 4 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 1-1/8 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0100 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 5/16 |
| Shank Type | Straight |
| Length Type | Standard Length |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 35/38 |
| Shank Diameter Tolerance | h5 |
| UNSPSC Code | 27112803 |
| MSC Part # | 60926680 |
| Mfr Part # | 3947L.031010 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$71.28
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 3/8; Flute Type: Spiral; Number Of Flutes: 7; End Mill Material: Solid Carbide; Length of Cut (Inch): 7/8; Coating/Finish: AlCr
Item #: 52462603
Brand: Emuge
Model #: 3937L.037030
Product Specifications
| Mill Diameter (Fractional Inch) | 3/8 |
| Flute Type | Spiral |
| Number Of Flutes | 7 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 7/8 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0300 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 3/8 |
| Shank Type | Straight |
| Length Type | Standard Length |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 34; 38 |
| Shank Diameter Tolerance | h6 |
| UNSPSC Code | 27112803 |
$81.45
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 12.00 mm Dia, 16.00 mm LOC, 4 Flute, 0.15 mm Chamfer Width, Solid Carbide
Item #: 09705583
Brand: WNT
Model #: 50907120
Product Specifications
| Mill Diameter (mm) | 12.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 16.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1000 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.15 |
| Overall Length (mm) | 73.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Short |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 12.00 |
| UNSPSC Code | 23241614 |
| Series | 50907 |
$126.51
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 20.00 mm Dia, 88.0000 mm LOC, 3 Flute, Solid Carbide
Item #: 53451795
Brand: Walter-Prototyp
Model #: 8200537
Product Specifications
| Mill Diameter (mm) | 20.00 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Length of Cut (mm) | 88.0000 |
| Shank Diameter (mm) | 20.0000 |
| Overall Length (mm) | 140.0000 |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Non-Ferrous Metal |
| Primary Workpiece Material Code | N |
| Coating/Finish | Uncoated |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | Yes |
| Flute Type | Spiral |
| Shank Type | Whistle Notch |
| Material Grade | Solid Carbide |
| Length Type | Standard |
| Neck Diameter (mm) | 19.000 |
| Reach Length (mm) | 88.00 |
| Shank Diameter Tolerance | h5 |
| Series | MD265 |
| UNSPSC Code | 27112803 |
$623.70
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 4.00 mm Dia, 4.00 mm LOC, 2 Flute, 0.15 mm Chamfer Width, Solid Carbide
Item #: 09708439
Brand: WNT
Model #: 50900403
Product Specifications
| Mill Diameter (mm) | 4.00 |
| Number Of Flutes | 2 |
| Length of Cut (mm) | 4.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1001 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.15 |
| Overall Length (mm) | 100.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Extra Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 6.00 |
| Neck Diameter (mm) | 3.900 |
| UNSPSC Code | 23241614 |
| Series | 50900 |
$76.47
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 5/8; Flute Type: Spiral; Number Of Flutes: 7; End Mill Material: Solid Carbide; Length of Cut (Inch): 1-1/4; Coating/Finish: AlCr
Item #: 52464823
Brand: Emuge
Model #: 3937L.062120
Product Specifications
| Mill Diameter (Fractional Inch) | 5/8 |
| Flute Type | Spiral |
| Number Of Flutes | 7 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 1-1/4 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.1200 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 5/8 |
| Shank Type | Straight |
| Length Type | Standard Length |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 34; 38 |
| Shank Diameter Tolerance | h6 |
| UNSPSC Code | 27112803 |
$210.61
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 2.30 mm Dia, 2.30 mm LOC, 2 Flute, 0.13 mm Chamfer Width, Solid Carbide
Item #: 09709445
Brand: WNT
Model #: 50900232
Product Specifications
| Mill Diameter (mm) | 2.30 |
| Number Of Flutes | 2 |
| Length of Cut (mm) | 2.30 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1001 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.13 |
| Overall Length (mm) | 55.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 3.00 |
| Neck Diameter (mm) | 2.220 |
| UNSPSC Code | 23241614 |
| Series | 50900 |
$58.72
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 0.80 mm Dia, 0.56 mm LOC, 0 deg Helix, CBN Coated, Corner Radius End, Centercutting Series CBN-LBFRRF
Item #: 09442971
Brand: US Union Tool
Model #: 2793107
Product Specifications
| Mill Diameter (mm) | 0.80 |
| Number Of Flutes | 2 |
| Length of Cut (mm) | 0.56 |
| End Mill Material | Solid Carbide |
| Coating/Finish | CBN |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.10 |
| Overall Length (mm) | 50 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.6250 |
| Length Type | Long |
| Extended Reach | No |
| Shank Diameter (mm) | 4.00 |
| Mill Diameter Tolerance | -0.008 |
| Shank Diameter Tolerance | -0.004 |
| UNSPSC Code | 27112803 |
| Material Grade | Super MG |
| Series | CBN-LBFRRF |
$243.71
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 3/8; Flute Type: Spiral; Number Of Flutes: 7; End Mill Material: Solid Carbide; Length of Cut (Inch): 7/8; Coating/Finish: AlCr
Item #: 52462611
Brand: Emuge
Model #: 3937L.037060
Product Specifications
| Mill Diameter (Fractional Inch) | 3/8 |
| Flute Type | Spiral |
| Number Of Flutes | 7 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 7/8 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0600 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 3/8 |
| Shank Type | Straight |
| Length Type | Standard Length |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 34; 38 |
| Shank Diameter Tolerance | h6 |
| UNSPSC Code | 27112803 |
$81.45
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 3/8; Flute Type: Spiral; Number Of Flutes: 6; End Mill Material: Solid Carbide; Length of Cut (Inch): 5/8; Coating/Finish: AlCr
Item #: 54099734
Brand: Emuge
Model #: 3941L.037030
Product Specifications
| Mill Diameter (Fractional Inch) | 3/8 |
| Flute Type | Spiral |
| Number Of Flutes | 6 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 5/8 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0300 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 3/8 |
| Shank Type | Straight |
| Length Type | Stub |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 35/38 |
| Shank Diameter Tolerance | h6 |
| UNSPSC Code | 27112803 |
| Mill Diameter (Fractional Inch) | 3/8 |
| Flute Type | Spiral |
| Number Of Flutes | 6 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 5/8 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0300 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 3/8 |
| Shank Type | Straight |
| Length Type | Stub |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 35/38 |
| Shank Diameter Tolerance | h6 |
| UNSPSC Code | 27112803 |
| MSC Part # | 54099734 |
| Mfr Part # | 3941L.037030 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$68.68
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 3/8" Dia, 3/4" LOC, 3 Flute, Solid Carbide
Item #: 16275893
Brand: Helical Solutions
Model #: 81412
Product Specifications
| Mill Diameter (Decimal Inch) | 0.3750 |
| Mill Diameter (Inch) | 3/8 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.7500 |
| Length of Cut (Inch) | 3/4 |
| Shank Diameter (Inch) | 3/8 |
| Shank Diameter (Decimal Inch) | 0.3750 |
| Overall Length (Decimal Inch) | 2.5000 |
| Overall Length (Inch) | 2-1/2 |
| Single Or Double End | Single |
| Coating/Finish Family | ZrN |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 40 |
| Primary Workpiece Material | Aluminum & Non-Ferrous |
| Primary Workpiece Material Code | N |
| Coating/Finish | Zplus |
| Variable Helix | No |
| Variable Index | Yes |
| Chipbreaker | No |
| Flute Type | Helical |
| Shank Type | Straight |
| Material Grade | Solid Carbide |
| Series | End Mills for Aluminum - 3 Flute - Square - 40 deg Helix - Variable Pitch |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
$45.94
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 5/16" Dia, 1-1/4" LOC, 0.0150" Radius, 3 Flute, Solid Carbide
Item #: 20551859
Brand: Iscar
Model #: 3399223
Product Specifications
| Mill Diameter (Inch) | 5/16 |
| Mill Diameter (Decimal Inch) | 0.3125 |
| Number Of Flutes | 3 |
| Length of Cut (Inch) | 1-1/4 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DLC |
| Overall Length (Inch) | 4 |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0150 |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Coolant Through | No |
| Pitch | Coarse |
| Overall Length (Decimal Inch) | 4.0000 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.0000 |
| Length Type | Extra Long |
| Flute Type | Spiral |
| Extended Reach | Yes |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Decimal Inch) | 0.3120 |
| Shank Diameter (Inch) | 5/16 |
| Reach Length (Decimal Inch) | 1.2500 |
| Reach Length (Inch) | 1-1/4 |
| Primary Workpiece Material | Non-Ferrous Metal |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | N |
| Material Grade | Submicron |
| Series | ECAI-B3-EC |
| Material Application | Non-Ferrous Metal |
| Coating Classification | PVD |
| For Use With. | Toolholders |
| Manufacturers Catalog Number | ECAI-B3 .312-1.3CR015-4EC |
$86.03
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 1/2; Flute Type: Spiral; Number Of Flutes: 7; End Mill Material: Solid Carbide; Length of Cut (Inch): 1-1/4; Coating/Finish: AlCr
Item #: 53339016
Brand: Emuge
Model #: 3938L.A50090
Product Specifications
| Mill Diameter (Fractional Inch) | 1/2 |
| Flute Type | Spiral |
| Number Of Flutes | 7 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 1-1/4 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0900 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 1/2 |
| Shank Type | Straight |
| Length Type | Long Length |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 34; 38 |
| Shank Diameter Tolerance | h6 |
| UNSPSC Code | 27112803 |
$135.94
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 4.00 mm Dia, 4.00 mm LOC, 2 Flute, 0.15 mm Chamfer Width, Solid Carbide
Item #: 09708736
Brand: WNT
Model #: 50900402
Product Specifications
| Mill Diameter (mm) | 4.00 |
| Number Of Flutes | 2 |
| Length of Cut (mm) | 4.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1001 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.15 |
| Overall Length (mm) | 65.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 6.00 |
| Neck Diameter (mm) | 3.900 |
| UNSPSC Code | 23241614 |
| Series | 50900 |
$67.60
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It