4 - Oil Hardening Flat Stock

Item #: LY4054033
Manufacturer: Starrett
Mfg #: 54033

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: O-1 *Thick: 5/32 *Width: 1-3/4

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 1.4100

$70.46

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 1 x 12 - Oil Hardening Flat Stock

Item #: LY4054224
Manufacturer: Starrett
Mfg #: 54224

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: O-1 *Thick: 1 *Width: 12

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 61.8400

$1,394.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 2 x 6 - Oil Hardening Flat Stock

Item #: LY5120004
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 2 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Commercial Truck - Call for Shipping Charges *Actual Weight - 123.5000

$1,188.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1-1/2 x 6 x 36 - Air Hardening Flat Stock

Item #: LY4557699
Manufacturer: Starrett
Mfg #: 57699

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-2 *Thick: 1-1/2 *Width: 6

Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Standard size: +/-.001" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *Ground straight and parallel

Shipping Info:
*Actual Weight - 93.1600 *Addl Fee Over 70lb - $19.00 per item

$2,944.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1-1/2 x 6 - Oil Hardening Flat Stock

Item #: LY5113208
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1-1/2 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Commercial Truck - Call for Shipping Charges *Actual Weight - 92.5000

$990.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1-1/2 x 12 x 18 - Oversize Air Hardening Flat Stock

Item #: LY4659138
Manufacturer: Starrett
Mfg #: 59138

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: A-2 *Thick: 1-1/2 *Width: 12

Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Oversize: +.010"/.015" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life. *Up to 50% more pieces per sharpening can be produced than with oil hardening steel *High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material *Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof *Full-length identification eliminates confusion with other steels *Furnished in 18" and 36" lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 91.7900 *Addl Fee Over 70lb - $19.00 per item

$3,173.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1 x 12 x 24 - 498 Low Carbon Precision Ground Flat Stock

Item #: LY8055054
Manufacturer: Starrett
Mfg #: 55054

Technical Specifications:
*Brand Name: Starrett *Length: 24 *Material: LC *Thick: 1 *Width: 12

Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost * Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc. *This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher. *Furnished in 24" (610mm) lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 81.5900 *Addl Fee Over 70lb - $19.00 per item

$1,297.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1-1/2 x 10 - Oil Hardening Flat Stock

Item #: LY4054538
Manufacturer: Starrett
Mfg #: 54538

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1-1/2 *Width: 10

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 145.8000 *Addl Fee Over 70lb - $19.00 per item

$4,321.13

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1-1/2 x 5 - Oil Hardening Flat Stock

Item #: LY4054535
Manufacturer: Starrett
Mfg #: 54535

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1-1/2 *Width: 5

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 75.2900 *Addl Fee Over 70lb - $19.00 per item

$1,441.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1-1/2 x 5 - Oil Hardening Flat Stock

Item #: LY5113207
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1-1/2 *Width: 5

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 76.7200 *Addl Fee Over 70lb - $19.00 per item

$1,126.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/16 x 3 x 36 - A6 Air Hardening Precision Ground Flat Stock

Item #: LY4458920
Manufacturer: Starrett
Mfg #: 58920

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-6 *Thick: 1/16 *Width: 3

Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance *Lower heat treating temperature results in deep hardness and minimum distortion

Shipping Info:
*Actual Weight - 1.9100

$472.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1-1/2 x 10 x 24 - 498 Low Carbon Precision Ground Flat Stock

Item #: LY8055075
Manufacturer: Starrett
Mfg #: 55075

Technical Specifications:
*Brand Name: Starrett *Length: 24 *Material: LC *Thick: 1-1/2 *Width: 10

Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost * Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc. *This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher. *Furnished in 24" (610mm) lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 101.9900 *Addl Fee Over 70lb - $19.00 per item

$1,597.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1-1/2 x 8 x 24 - 498 Low Carbon Precision Ground Flat Stock

Item #: LY8055074
Manufacturer: Starrett
Mfg #: 55074

Technical Specifications:
*Brand Name: Starrett *Length: 24 *Material: LC *Thick: 1-1/2 *Width: 8

Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost * Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc. *This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher. *Furnished in 24" (610mm) lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 81.5900 *Addl Fee Over 70lb - $19.00 per item

$1,345.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 3/4 x 10 - Oil Hardening Flat Stock

Item #: LY5104814
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 3/4 *Width: 10

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 77.3100 *Addl Fee Over 70lb - $19.00 per item

$995.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 5/16 x 5/16 - Oil Hardening Flat Stock

Item #: LY5102001
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 5/16 *Width: 5/16

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 1.0260 *Dimensions - Height: .380 Length: 36.0 Width: 1.15

$56.63

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/4 x 1/4 - Air Hardening Flat Stock

Item #: LY4557335
Manufacturer: Starrett
Mfg #: 57335

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-2 *Thick: 1/4 *Width: 1/4

Description:
*A-2 Air Hardening Ground Flat Stock 36" Length *Made from fine grain, electric furnace air-hardening, 5 chrome tool steel *Has excellent wear and abrasion resistance properties *Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections. *Low sulphur content makes it non-freemachining. *HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately. *Tolerance Thickness ±.001" Width +.000/.005" *Larger Sizes A-2 available thru 1" thickness *Oversize tolerances available thru 2" thickness *Many other types of gage stock available *Modified Nutec 42 *A-6 Diecrat *D-2 Aristocrat *S-7 *C-1018 Marshallcrat low carbon

Shipping Info:
*Actual Weight - .6500

$152.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 3/32 x 5 - Oil Hardening Flat Stock

Item #: LY4054288
Manufacturer: Starrett
Mfg #: 54288

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 3/32 *Width: 5

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 4.8400

$265.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 1/4 x 2 - Oil Hardening Flat Stock

Item #: LY4054076
Manufacturer: Starrett
Mfg #: 54076

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: O-1 *Thick: 1/4 *Width: 2

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 2.5800

$94.71

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 1/4 x 5 - Oversize Air Hardening Flat Stock

Item #: LY701617
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: A-2 *Thick: 1/4 *Width: 5

Description:
*Oversize A-2 Air Hardening Ground Flat Stock

Shipping Info:
*Actual Weight - 6.7800

$155.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/2 x 5/8 - Air Hardening Flat Stock

Item #: LY4557347
Manufacturer: Starrett
Mfg #: 57347

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-2 *Thick: 1/2 *Width: 5/8

Description:
*A-2 Air Hardening Ground Flat Stock 36" Length *Made from fine grain, electric furnace air-hardening, 5 chrome tool steel *Has excellent wear and abrasion resistance properties *Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections. *Low sulphur content makes it non-freemachining. *HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately. *Tolerance Thickness ±.001" Width +.000/.005" *Larger Sizes A-2 available thru 1" thickness *Oversize tolerances available thru 2" thickness *Many other types of gage stock available *Modified Nutec 42 *A-6 Diecrat *D-2 Aristocrat *S-7 *C-1018 Marshallcrat low carbon

Shipping Info:
*Actual Weight - 3.2300

$217.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It