3/8 x 2 x 24" OAL Carbon Flat Stock

Item #: LY8000082
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 24 *Material: Low Carbon *Thick: 3/8 *Width: 2

Description:
*A fine-grained, vacuum-degassed carbon steel. *It is easily machined, has excellent weldability and responds uniformly to case hardening. *The manganese content provides greater strength and hardness compared to many other carbon steels. *It is often used in its natural state for such applications as backup plate, stripper plates, punch pads and machine parts. *As a case hardened material, it is used for jigs, fixtures, cams and patterns. *Hardening: CARBURIZING: For maximum depth of hardening, 1/21", hold in carburizing salt at 1700?F for 3 hours. *CASE HARDENING: Hold in sodium cyanide salt bath at 1500?F for 30 minutes. *Maximum case is .006"

Shipping Info:
*Actual Weight - 5.1700

$93.52

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1-1/2X2-1/2X24 CARBON FLAT STOCK

Item #: LY8003980
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA

Description:

Shipping Info:
*Actual Weight - 25.8200

$283.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1 x 8 - Oil Hardening Flat Stock

Item #: LY4054511
Manufacturer: Starrett
Mfg #: 54511

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1 *Width: 8

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 82.4700 *Addl Fee Over 70lb - $19.00 per item

$1,703.28

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1-1/2 x 6 - Oil Hardening Flat Stock

Item #: LY4054536
Manufacturer: Starrett
Mfg #: 54536

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1-1/2 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 92.7800 *Addl Fee Over 70lb - $19.00 per item

$1,697.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1-1/4 x 6 - Oil Hardening Flat Stock

Item #: LY5111608
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1-1/4 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 77.4000 *Addl Fee Over 70lb - $19.00 per item

$848.03

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 2 x 6 - Oil Hardening Flat Stock

Item #: LY4054542
Manufacturer: Starrett
Mfg #: 54542

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 2 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 123.7100 *Addl Fee Over 70lb - $19.00 per item

$2,036.19

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1-1/4 x 6 x 36 - Air Hardening Flat Stock

Item #: LY4557692
Manufacturer: Starrett
Mfg #: 57692

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-2 *Thick: 1-1/4 *Width: 6

Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Standard size: +/-.001" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *Ground straight and parallel

Shipping Info:
*Actual Weight - 76.4900 *Addl Fee Over 70lb - $19.00 per item

$2,695.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/2 x 1-1/2 - Oil Hardening Flat Stock

Item #: LY4054442
Manufacturer: Starrett
Mfg #: 54442

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1/2 *Width: 1-1/2

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 7.7400

$242.10

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1 x 5 - Oil Hardening Flat Stock

Item #: LY5110010
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1 *Width: 5

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 51.5000

$584.73

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 3/8 x 2 - Oversize Oil Hardening Flat Stock

Item #: LY602409
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 3/8 *Width: 2

Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock *Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis *Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools *Width +.010/.015 *Thickness +10.010/.015 *Squareness edge to surface .003 per inch of thickness *Finish 10-25 micro inches

Shipping Info:
*Actual Weight - 4.0200

$82.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8 x 1-1/4 x 18 - Oversize Air Hardening Flat Stock

Item #: LY4657619
Manufacturer: Starrett
Mfg #: 57619

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: A-2 *Thick: 5/8 *Width: 1-1/4

Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Oversize: +.010"/.015" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life. *Up to 50% more pieces per sharpening can be produced than with oil hardening steel *High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material *Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof *Full-length identification eliminates confusion with other steels *Furnished in 18" and 36" lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 3.9800

$210.37

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/16 x 6 x 18 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4369421
Manufacturer: Starrett
Mfg #: 69421

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: D-2 *Thick: 5/16 *Width: 6

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 9.5600

$472.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1 x 6 - Oil Hardening Flat Stock

Item #: LY5110011
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 62.5000

$681.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/2 x 2 - Oil Hardening Flat Stock

Item #: LY4054443
Manufacturer: Starrett
Mfg #: 54443

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1/2 *Width: 2

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 10.3200

$294.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8 x 4 x 18 - Oversize Air Hardening Flat Stock

Item #: LY4657620
Manufacturer: Starrett
Mfg #: 57620

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: A-2 *Thick: 5/8 *Width: 4

Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Oversize: +.010"/.015" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life. *Up to 50% more pieces per sharpening can be produced than with oil hardening steel *High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material *Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof *Full-length identification eliminates confusion with other steels *Furnished in 18" and 36" lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 12.7500

$502.17

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8 x 5 x 18 - Oversize Air Hardening Flat Stock

Item #: LY4657621
Manufacturer: Starrett
Mfg #: 57621

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: A-2 *Thick: 5/8 *Width: 5

Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Oversize: +.010"/.015" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life. *Up to 50% more pieces per sharpening can be produced than with oil hardening steel *High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material *Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof *Full-length identification eliminates confusion with other steels *Furnished in 18" and 36" lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 15.9400

$610.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/8 x 6 x 36 - A6 Air Hardening Precision Ground Flat Stock

Item #: LY4458960
Manufacturer: Starrett
Mfg #: 58960

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-6 *Thick: 1/8 *Width: 6

Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance *Lower heat treating temperature results in deep hardness and minimum distortion

Shipping Info:
*Actual Weight - 7.6500

$1,079.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 3/8 x 3 - Oversize Oil Hardening Flat Stock

Item #: LY602411
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 3/8 *Width: 3

Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock *Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis *Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools *Width +.010/.015 *Thickness +10.010/.015 *Squareness edge to surface .003 per inch of thickness *Finish 10-25 micro inches

Shipping Info:
*Actual Weight - 6.0100

$111.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8 x 1/2 x 18 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4369422
Manufacturer: Starrett
Mfg #: 69422

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: D-2 *Thick: 3/8 *Width: 1/2

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - .9600

$97.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/2 x 2-1/2 - Oil Hardening Flat Stock

Item #: LY4054444
Manufacturer: Starrett
Mfg #: 54444

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1/2 *Width: 2-1/2

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 12.8900

$346.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It