Abrasives > Coated & Non-Woven Abrasives (ET04) - (27591 Products)
Abrasives > Coated & Non-Woven Abrasives (ET04)
Square End Mill: 1/8" Dia, 1/2" LOC, 3 Flute, Solid Carbide
Item #: 33108242
Brand: Titan USA
Model #: TC30508
Product Specifications
| Mill Diameter (Decimal Inch) | 0.1250 |
| Mill Diameter (Inch) | 1/8 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.5000 |
| Length of Cut (Inch) | 1/2 |
| Shank Diameter (Inch) | 1/8 |
| Shank Diameter (Decimal Inch) | 0.1250 |
| Overall Length (Decimal Inch) | 1.5000 |
| Overall Length (Inch) | 1-1/2 |
| Single Or Double End | Single |
| Coating/Finish Family | Bright/Uncoated |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 60 |
| Primary Workpiece Material | High-Temp Alloy |
| Primary Workpiece Material Code | S |
| Coating/Finish | Bright/Uncoated |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Straight |
| Material Grade | Solid Carbide |
| Series | General Purpose End Mills - Carbide - 3 Flute - Square - 60 deg Helix |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
$15.64
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1" Dia, 4" LOC, 0.77 mm Radius, 8 Flute, Solid Carbide
Item #: 09325291
Brand: Kennametal
Model #: 7102922
Product Specifications
| Mill Diameter (Inch) | 1 |
| Mill Diameter (Decimal Inch) | 1 |
| Number Of Flutes | 8 |
| Length of Cut (Inch) | 4 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | AlCrN |
| Overall Length (Inch) | 7 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0300 |
| Variable Index | Yes |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.77 |
| Coolant Through | Yes |
| Overall Length (Decimal Inch) | 7 |
| Chipbreaker | Yes |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 4.0000 |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (Decimal Inch) | 1.0000 |
| Shank Diameter (Inch) | 1 |
| UNSPSC Code | 27112803 |
| Series | HARVI IV |
$797.79
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 5/16" Dia, 7/16" LOC, 0.0150" Radius, 4 Flute, Solid Carbide
Item #: 09899394
Brand: Walter-Prototyp
Model #: 8417057
Product Specifications
| Mill Diameter (Inch) | 5/16 |
| Number Of Flutes | 4 |
| Length of Cut (Inch) | 7/16 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | nACo |
| Overall Length (Inch) | 2 |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0150 |
| Cutting Direction | Right Hand |
| Coolant Through | No |
| Chipbreaker | No |
| Extended Reach | Yes |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Inch) | 5/16 |
| Reach Length (Decimal Inch) | 0.8976 |
| Shank Diameter Tolerance | h6 |
| Primary Workpiece Material | Superalloys & Titanium |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | S |
| Secondary Workpiece Material | Stainless Steel; Steel |
| Secondary Workpiece Material Code | P; M |
| Series | MA375.A-4-R |
| Proprietary Coating Designation | WJ30EM |
| Manufacturers Catalog Number | MA375.7.93A4S038-WJ30EM |
$42.39
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 4.00 mm Dia, 3.20 mm LOC, 30 deg Helix, Hardmax Coated, Corner Radius End, Centercutting Series HLRS
Item #: 09897158
Brand: US Union Tool
Model #: 2938151
Product Specifications
| Mill Diameter (mm) | 4.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 3.20 |
| End Mill Material | Solid Carbide |
| Coating/Finish | Hardmax |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.20 |
| Overall Length (mm) | 65 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.7500 |
| Length Type | Long |
| Extended Reach | Yes |
| Shank Diameter (mm) | 4.00 |
| Mill Diameter Tolerance | -0.015 |
| Shank Diameter Tolerance | -0.005 |
| UNSPSC Code | 27112803 |
| Material Grade | Super MG |
| Series | HLRS |
$108.09
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 20.00 mm Dia, 26.00 mm LOC, 3 Flute, 0.20 mm Chamfer Width, Solid Carbide
Item #: 09474065
Brand: WNT
Model #: 5096620100
Product Specifications
| Mill Diameter (mm) | 20.00 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 26.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DPB72S |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.20 |
| Overall Length (mm) | 92.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Short |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 20.00 |
| Neck Diameter (mm) | 19.500 |
| UNSPSC Code | 23241614 |
| Series | 50966 |
$272.59
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 6.00 mm Dia, 4.80 mm LOC, 30 deg Helix, Hardmax Coated, Corner Radius End, Centercutting Series HLRS
Item #: 09887969
Brand: US Union Tool
Model #: 2938168
Product Specifications
| Mill Diameter (mm) | 6.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 4.80 |
| End Mill Material | Solid Carbide |
| Coating/Finish | Hardmax |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.10 |
| Overall Length (mm) | 70 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.2500 |
| Length Type | Long |
| Extended Reach | Yes |
| Shank Diameter (mm) | 10.00 |
| Mill Diameter Tolerance | -0.015 |
| Shank Diameter Tolerance | -0.005 |
| UNSPSC Code | 27112803 |
| Material Grade | Super MG |
| Series | HLRS |
$157.03
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 3.00 mm Dia, 2.40 mm LOC, 30 deg Helix, Hardmax Coated, Corner Radius End, Centercutting Series HLRS
Item #: 09897372
Brand: US Union Tool
Model #: 2938146
Product Specifications
| Mill Diameter (mm) | 3.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 2.40 |
| End Mill Material | Solid Carbide |
| Coating/Finish | Hardmax |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 1.00 |
| Overall Length (mm) | 70 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 2.0000 |
| Length Type | Long |
| Extended Reach | Yes |
| Shank Diameter (mm) | 4.00 |
| Mill Diameter Tolerance | -0.015 |
| Shank Diameter Tolerance | -0.005 |
| UNSPSC Code | 27112803 |
| Material Grade | Super MG |
| Series | HLRS |
$122.36
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 6.00 mm Dia, 12.00 mm LOC, 2 Flute, 0.10 mm Chamfer Width, Solid Carbide
Item #: 09615006
Brand: WNT
Model #: 5001006300
Product Specifications
| Mill Diameter (mm) | 6.00 |
| Number Of Flutes | 2 |
| Length of Cut (mm) | 12.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | PCD |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.10 |
| Overall Length (mm) | 100.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Long |
| Flute Type | Straight |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 6.00 |
| Neck Diameter (mm) | 5.400 |
| UNSPSC Code | 23241614 |
| Series | 50010 |
$256.35
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 14.00 mm Dia, 30.00 mm LOC, 1.50 mm Radius, 6 Flute, Solid Carbide
Item #: 09881897
Brand: WNT
Model #: 5358614015
Product Specifications
| Mill Diameter (mm) | 14.00 |
| Number Of Flutes | 6 |
| Length of Cut (mm) | 30.0000 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DPX72S |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 1.50 |
| Overall Length (mm) | 83.0000 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 14.0000 |
| Neck Diameter (mm) | 13.600 |
| UNSPSC Code | 27112803 |
$129.66
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 3.00 mm Dia, 3.00 mm LOC, 45 deg Helix, Hardmax Coated, Corner Radius End, Centercutting Series HRRS
Item #: 09480617
Brand: US Union Tool
Model #: 2256010
Product Specifications
| Mill Diameter (mm) | 3.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 3.00 |
| End Mill Material | Solid Carbide |
| Coating/Finish | Hardmax |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.80 |
| Overall Length (mm) | 50 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.7500 |
| Length Type | Long |
| Extended Reach | No |
| Shank Diameter (mm) | 3.00 |
| Mill Diameter Tolerance | -0.02 |
| Shank Diameter Tolerance | -0.005 |
| UNSPSC Code | 27112803 |
| Material Grade | Super MG |
| Series | HRRS |
$89.94
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 3/4; Flute Type: Helical; Number Of Flutes: 8; End Mill Material: Solid Carbide; Length of Cut (Inch): 2-1/4; Coating/Finish: AlCrN
Item #: 09483645
Brand: Kennametal
Model #: 7102902
Product Specifications
| Mill Diameter (Fractional Inch) | 3/4 |
| Flute Type | Helical |
| Number Of Flutes | 8 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 2-1/4 |
| Coating/Finish | AlCrN |
| Centercutting | No |
| End Type | Single |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 3/4 |
| Mill Diameter (Decimal Inch) | 0.7500 |
| Length of Cut (Decimal Inch) | 2.2500 |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (Decimal Inch) | 0.7500 |
| Chipbreaker | Yes |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 35 |
| Material Grade | Carbide |
| Cutting Direction | Right Hand |
| Series | HARVI IV |
| UNSPSC Code | 27112803 |
$397.78
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 4.00 mm Dia, 4.00 mm LOC, 45 deg Helix, Hardmax Coated, Corner Radius End, Centercutting Series HRRS
Item #: 09480005
Brand: US Union Tool
Model #: 2256002
Product Specifications
| Mill Diameter (mm) | 4.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 4.00 |
| End Mill Material | Solid Carbide |
| Coating/Finish | Hardmax |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 1.00 |
| Overall Length (mm) | 50 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.2500 |
| Length Type | Long |
| Extended Reach | No |
| Shank Diameter (mm) | 4.00 |
| Mill Diameter Tolerance | -0.02 |
| Shank Diameter Tolerance | -0.005 |
| UNSPSC Code | 27112803 |
| Material Grade | Super MG |
| Series | HRRS |
$91.77
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 8.00 mm Dia, 21.00 mm LOC, 1.00 mm Radius, 6 Flute, Solid Carbide
Item #: 09907312
Brand: WNT
Model #: 5358608010
Product Specifications
| Mill Diameter (mm) | 8.00 |
| Number Of Flutes | 6 |
| Length of Cut (mm) | 21.0000 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DPX72S |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 1.00 |
| Overall Length (mm) | 63.0000 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 8.0000 |
| Neck Diameter (mm) | 7.700 |
| UNSPSC Code | 27112803 |
$67.04
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1.00 mm Dia, 0.80 mm LOC, 30 deg Helix, Hardmax Coated, Corner Radius End, Centercutting Series HLRS
Item #: 09647322
Brand: US Union Tool
Model #: 2938021
Product Specifications
| Mill Diameter (mm) | 1.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 0.80 |
| End Mill Material | Solid Carbide |
| Coating/Finish | Hardmax |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.30 |
| Overall Length (mm) | 50 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.2500 |
| Length Type | Long |
| Extended Reach | Yes |
| Shank Diameter (mm) | 4.00 |
| Mill Diameter Tolerance | -0.015 |
| Shank Diameter Tolerance | -0.005 |
| UNSPSC Code | 27112803 |
| Material Grade | Super MG |
| Series | HLRS |
$75.46
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 7.70 mm Dia, 12.00 mm LOC, 3 Flute, 0.10 mm Chamfer Width, Solid Carbide
Item #: 09563933
Brand: WNT
Model #: 5060907700
Product Specifications
| Mill Diameter (mm) | 7.70 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 12.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1000 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.10 |
| Overall Length (mm) | 55.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Extra-Short |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 8.00 |
| UNSPSC Code | 23241614 |
| Series | 50609 |
$31.37
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 1.00 mm Dia, 1.00 mm LOC, 2 Flute, 0.10 mm Chamfer Width, Solid Carbide
Item #: 09764903
Brand: WNT
Model #: 50900102
Product Specifications
| Mill Diameter (mm) | 1.00 |
| Number Of Flutes | 2 |
| Length of Cut (mm) | 1.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1001 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.10 |
| Overall Length (mm) | 55.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 3.00 |
| Neck Diameter (mm) | 0.950 |
| UNSPSC Code | 23241614 |
| Series | 50900 |
$57.08
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 2.50 mm Dia, 2.00 mm LOC, 30 deg Helix, Hardmax Coated, Corner Radius End, Centercutting Series HLRS
Item #: 09866864
Brand: US Union Tool
Model #: 2938111
Product Specifications
| Mill Diameter (mm) | 2.50 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 2.00 |
| End Mill Material | Solid Carbide |
| Coating/Finish | Hardmax |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.50 |
| Overall Length (mm) | 50 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 2.2500 |
| Length Type | Long |
| Extended Reach | Yes |
| Shank Diameter (mm) | 6 |
| Mill Diameter Tolerance | -0.015 |
| Shank Diameter Tolerance | -0.005 |
| UNSPSC Code | 27112803 |
| Material Grade | Super MG |
| Series | HLRS |
$87.69
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 11.00 mm Dia, 26.00 mm LOC, 2 Flute, 0.10 mm Chamfer Width, Solid Carbide
Item #: 09483801
Brand: WNT
Model #: 5095811200
Product Specifications
| Mill Diameter (mm) | 11.00 |
| Number Of Flutes | 2 |
| Length of Cut (mm) | 26.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DPB72S |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.10 |
| Overall Length (mm) | 83.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 12.00 |
| Neck Diameter (mm) | 10.800 |
| UNSPSC Code | 23241614 |
| Series | 50958 |
$82.73
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 5/8" Dia, 1-5/8" LOC, 2.29 mm Radius, 8 Flute, Solid Carbide
Item #: 09322215
Brand: Kennametal
Model #: 7102875
Product Specifications
| Mill Diameter (Inch) | 5/8 |
| Mill Diameter (Decimal Inch) | 0.625 |
| Number Of Flutes | 8 |
| Length of Cut (Inch) | 1-5/8 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | AlCrN |
| Overall Length (Inch) | 4 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0900 |
| Variable Index | Yes |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 2.29 |
| Coolant Through | Yes |
| Overall Length (Decimal Inch) | 4 |
| Chipbreaker | Yes |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.6250 |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (Decimal Inch) | 0.6250 |
| Shank Diameter (Inch) | 5/8 |
| UNSPSC Code | 27112803 |
| Series | HARVI IV |
$267.17
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 1/2; Flute Type: Spiral; Number Of Flutes: 7; End Mill Material: Solid Carbide; Length of Cut (Inch): 5/8; Coating/Finish: AlCr
Item #: 52461464
Brand: Emuge
Model #: 3935L.050090
Product Specifications
| Mill Diameter (Fractional Inch) | 1/2 |
| Flute Type | Spiral |
| Number Of Flutes | 7 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 5/8 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0900 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 1/2 |
| Shank Type | Straight |
| Length Type | Stub |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 34; 38 |
| Shank Diameter Tolerance | h6 |
| UNSPSC Code | 27112803 |
$123.77
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It